Assign DHCP uniquely to a particular SSID?

[neeraj_gupta_g8]

Current setup: 

• 6 APs in an unleashed network, serving up 4 separate SSIDs.  
• DHCP turned off on Rukus, and managed by non-Ruckus routing infrastructure.

Requirement:

• We would like to route for clients that come in on a particular SSID (call this SSID-4) differently.  Need to find a way to "mark" those clients on SSID-4 so that the router can do the right things.
• One concept we had was for the Ruckus wireless to have DHCP turned on for just SSID-4, and assign IP's in a specific/known range so that the router could treat route these differently.

Question:

• Can the DHCP be turned on for just one of the SSIDs?
• Can we set the range of IPs that that DHCP serves?
• If not, any other ideas for how to "mark" these clients/packets for the upstream router to handle?

Note: We are okay using CLI if that is the only way.  Thanks!

[michael_brado]

Please let us know if this works.  Unleashed is not designed for multi-VLAN, only single LAN deployment.  Switches assigning VLAN by WLAN priority tag would be a workaround solution.

[thomas_fankhaus]

hi Michael,
i did not know that. but i use vlan on unleashed with success.
what i doing wrong?

[victor_cenac]

Ooops! I didn't know that about Unleashed.... Is the ACL available on Unleash? If so, he could simply block traffic from WLAN-4 to the networks he'd like to keep private.