Hi Abilash, Thanks for the quick reply! AP version 3.x ??? Where do I get that? I can't find it on download...
I don't see any errors on the AP. (get syslog log)
I'm also trying to put the DHCP Option 43 on my OPNsense router: OPNSense: [Services]->[DHCPv4]->[LAN]: Additional options -> (adding the following value): Number=43 Type= IP addrerss or host Value= 172.17.0.6 (my vSZ)
OPNSense: [Services]->[DHCPv4]->[LAN]: Additional options -> (adding the following value): Number=43 Type= text Value= 060a3137322e31372e302e36
I did the following with my r500: 1.set factory 2.reboot 3.Upgraded firmware to standalone 110.0 4.set scg ip 172.17.0.6 5.set director 172.17.0.6 6.set discovery-agent enabled (already enabled by default) 7.reboot
Please ssh into AP using default username and password (super/sp-admin), and try to check its firmware version. If you see any version apart from 3.x/5.x please ping to SZ's IP and check the connectivity.
If it is there isn't any issues then please share into SZ controller and run show lwapp2scg you should see "accept all" if see deny all please check below link and enable lwapp2scg.