cancel
Showing results for 
Search instead for 
Did you mean: 

APs restarts quite often with various reasons (vSZ 3.5.1)

dawid_krawczak
New Contributor III
I have been experiencing problems with AP restarts for a very long time.
APs restarts quite often with various reasons:
was rebooted by the system because of [system recovery by watchdog]
was rebooted by the system because of [system fault]
was rebooted by the system because of [AP lost SCG more than 7200 seconds]
was rebooted because of [power cycle].
I have reviewed our PoE switches (Juniper EX3300), but didn't noticed any issues on their side.
APs are managred by vSZ version: 3.5.1.0.296, AP models are: ZF7372, R510, H510.
Has anyone on that forum experienced that kind of problems?

6 REPLIES 6

sanjay_kumar
RUCKUS Team Member
Hi Dawid,

Based on the AP reboot events you have mentioned, there could be many reasons for the issue to occur.

"AP lost SCG more than 7200 seconds" means there was no communication between the AP and vSZ. Or there could be packet drops between the AP and vSZ.

About the other events, we would need the AP support log to find the root cause.
I request you to please open a support case from the below link so that the support team can check on this.

https://support.ruckuswireless.com/contact-us

Regards,
Sanjay Kumar

dawid_krawczak
New Contributor III
Hello Sanjay,

Thank you for the response. Unfortunately we don't have valid support contract for this particular controller, that's the reason I'm asking this question on forum.

Dawid

eightohtwoeleve
Contributor III
Interesting to note, we too have seen APs seemingly randomly rebooting .. and yes, we ALSO have Juniper EX3300 switches.

dawid_krawczak
New Contributor III
That's interesting, and how did you deal with it?