02-18-2021 02:30 PM
Hello, we have an R710 in a Smartzone cluster running firmware versions:
Controller: 5.2.1.0.515
AP: 5.2.1.0.698
We are seeing this outstanding WLAN alert:
'AP WLAN oversubscribed' ' does not have enough capacity to deploy all WLANs...;
However the AP is only broadcasting 6 SSIDs and I understand the limit is 32.
What do you think could be causing this alert ?
Thank you.
02-18-2021 02:35 PM
Hi Philip,
Could you share get wlanlist output from this AP CLI?
Regards,
-Ankush
02-18-2021 02:48 PM
thank you. I has a lot I think. Do I need to manually delete some of these on the CLI ? If so, what is the command ? Thank you.
Copyright(C) 2021 Ruckus Wireless, Inc. All Rights Reserved.
** Ruckus R710 Multimedia Hotzone Wireless AP: 321503607787
rkscli: get wlanlist output
name status type wlanID radioID bssid ssid
-------------------------------------------------------------------------------- ------------------
wlan0 down AP wlan0 0 00:00:00:00:00:00 Wireless1
wlan1 down AP wlan1 0 00:00:00:00:00:00 Wireless2
wlan2 down AP wlan2 0 00:00:00:00:00:00 Wireless3
wlan3 down AP wlan3 0 00:00:00:00:00:00 Wireless4
wlan4 down AP wlan4 0 00:00:00:00:00:00 Wireless5
wlan5 down AP wlan5 0 00:00:00:00:00:00 Wireless6
wlan6 down AP wlan6 0 00:00:00:00:00:00 Wireless7
wlan7 down AP wlan7 0 00:00:00:00:00:00 Wireless8
wlan8 down AP wlan8 0 00:00:00:00:00:00 Wireless9
wlan9 down AP wlan9 0 00:00:00:00:00:00 Wireless10
wlan10 down AP wlan10 0 00:00:00:00:00:00 Wireless11
wlan11 down AP wlan11 0 00:00:00:00:00:00 Wireless12
wlan12 down AP wlan12 0 00:00:00:00:00:00 Wireless13
wlan13 down AP wlan13 0 00:00:00:00:00:00 Wireless14
wlan14 down AP wlan14 0 00:00:00:00:00:00 Wireless14
recovery-ssid down AP wlan102 0 00:00:00:00:00:00 Recover.Me-38B B40
wlan32 up AP wlan32 1 58:b6:33:38:bb:4c AKL-P1
wlan33 up AP wlan33 1 58:b6:33:78:bb:4c Corp
wlan34 up AP wlan34 1 58:b6:33:b8:bb:4c BYOD-GO
wlan35 up AP wlan35 1 58:b6:33:f8:bb:4c VLS
wlan36 up AP wlan36 1 58:b6:33:38:bb:4d CBN
wlan37 down AP wlan37 1 00:00:00:00:00:00 Wireless37
wlan38 up AP wlan38 1 58:b6:33:b8:bb:4d Mediaworks_GUE ST
wlan39 down AP wlan39 1 00:00:00:00:00:00 Wireless39
wlan40 down AP wlan40 1 00:00:00:00:00:00 Wireless40
wlan41 down AP wlan41 1 00:00:00:00:00:00
wlan42 down AP wlan42 1 00:00:00:00:00:00
wlan43 down AP wlan43 1 00:00:00:00:00:00 Wireless43
wlan44 down AP wlan44 1 00:00:00:00:00:00
wlan45 down AP wlan45 1 00:00:00:00:00:00
wlan46 down AP wlan46 1 00:00:00:00:00:00
wlan47 down AP wlan47 1 00:00:00:00:00:00
OK
rkscli:
02-18-2021 02:53 PM
@philip_francis_3lh2kfry55kua Yeah, a little too over capacity! Look like this AP have been moving back and forth between different groups/zones. Please do a set factory on it and rejoin if this is the only one affected.
or