02-16-2021 06:14 PM
Just want to find out if Ruckus R320 will work on Smartzone 3.6.2.0.78. After I made sure the R320 is on an solo firmware and it will show up on the staging zone of the smartzone 3.6.2.0.78 but when I tried to move this AP to a working zone, this zone does not support this R320.
02-16-2021 07:42 PM
The R320 is not supported on 3.6.2. It requires 5.1 or higher.
02-16-2021 07:59 PM
thanks for the confirmation