RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
02-18-2021 02:30 PM
Hello, we have an R710 in a Smartzone cluster running firmware versions:
Controller: 5.2.1.0.515
AP: 5.2.1.0.698
We are seeing this outstanding WLAN alert:
'AP WLAN oversubscribed' ' does not have enough capacity to deploy all WLANs...;
However the AP is only broadcasting 6 SSIDs and I understand the limit is 32.
What do you think could be causing this alert ?
Thank you.
02-18-2021 02:35 PM
Hi Philip,
Could you share get wlanlist output from this AP CLI?
Regards,
-Ankush
02-18-2021 02:48 PM
thank you. I has a lot I think. Do I need to manually delete some of these on the CLI ? If so, what is the command ? Thank you.
Copyright(C) 2021 Ruckus Wireless, Inc. All Rights Reserved.
** Ruckus R710 Multimedia Hotzone Wireless AP: 321503607787
rkscli: get wlanlist output
name status type wlanID radioID bssid ssid
-------------------------------------------------------------------------------- ------------------
wlan0 down AP wlan0 0 00:00:00:00:00:00 Wireless1
wlan1 down AP wlan1 0 00:00:00:00:00:00 Wireless2
wlan2 down AP wlan2 0 00:00:00:00:00:00 Wireless3
wlan3 down AP wlan3 0 00:00:00:00:00:00 Wireless4
wlan4 down AP wlan4 0 00:00:00:00:00:00 Wireless5
wlan5 down AP wlan5 0 00:00:00:00:00:00 Wireless6
wlan6 down AP wlan6 0 00:00:00:00:00:00 Wireless7
wlan7 down AP wlan7 0 00:00:00:00:00:00 Wireless8
wlan8 down AP wlan8 0 00:00:00:00:00:00 Wireless9
wlan9 down AP wlan9 0 00:00:00:00:00:00 Wireless10
wlan10 down AP wlan10 0 00:00:00:00:00:00 Wireless11
wlan11 down AP wlan11 0 00:00:00:00:00:00 Wireless12
wlan12 down AP wlan12 0 00:00:00:00:00:00 Wireless13
wlan13 down AP wlan13 0 00:00:00:00:00:00 Wireless14
wlan14 down AP wlan14 0 00:00:00:00:00:00 Wireless14
recovery-ssid down AP wlan102 0 00:00:00:00:00:00 Recover.Me-38B B40
wlan32 up AP wlan32 1 58:b6:33:38:bb:4c AKL-P1
wlan33 up AP wlan33 1 58:b6:33:78:bb:4c Corp
wlan34 up AP wlan34 1 58:b6:33:b8:bb:4c BYOD-GO
wlan35 up AP wlan35 1 58:b6:33:f8:bb:4c VLS
wlan36 up AP wlan36 1 58:b6:33:38:bb:4d CBN
wlan37 down AP wlan37 1 00:00:00:00:00:00 Wireless37
wlan38 up AP wlan38 1 58:b6:33:b8:bb:4d Mediaworks_GUE ST
wlan39 down AP wlan39 1 00:00:00:00:00:00 Wireless39
wlan40 down AP wlan40 1 00:00:00:00:00:00 Wireless40
wlan41 down AP wlan41 1 00:00:00:00:00:00
wlan42 down AP wlan42 1 00:00:00:00:00:00
wlan43 down AP wlan43 1 00:00:00:00:00:00 Wireless43
wlan44 down AP wlan44 1 00:00:00:00:00:00
wlan45 down AP wlan45 1 00:00:00:00:00:00
wlan46 down AP wlan46 1 00:00:00:00:00:00
wlan47 down AP wlan47 1 00:00:00:00:00:00
OK
rkscli:
02-18-2021 02:53 PM
@philip_francis_3lh2kfry55kua Yeah, a little too over capacity! Look like this AP have been moving back and forth between different groups/zones. Please do a set factory on it and rejoin if this is the only one affected.
or
