802.3 af on secondary for T610S

[Corleone]

Hello I have a T610s connected to my mesh unleashed network. I would like to use the secondary ethernet port of the Ap to plug a 802.3 af camera. AP is connected to a ICX 7150 switch and the port is configured as a class 4 port 802.3 at delivering 30000 at that port.

When I connect the camera it doesn't work, I connect a computer and I have a link but no link when PoE devices are connected.

Thanks,

JP

[Vásquez_Fer]

Hello @Corleone  , 

Hope you are doing well , 

Checking the guides, it looks like this is a normal port used for uplink, but it doesn't supply power to that port, that's why it doesn't work when you connect the camera.

https://webresources.ruckuswireless.com/pdf/datasheets/ds-ruckus-t610.pdf

https://support.ruckuswireless.com/documents/1285

PoE limitations 

https://docs.commscope.com/bundle/unleashed-200.14-onlinehelp/page/GUID-12E6EFCF-E117-47FA-9D07-FE2E...

It shows that you can use PoE "IN" on the port to power up the unit, but the additional port is a normal port that does not supply power on.

Fernando Vasquez