2.4 Radio off

[nostrander]

I have a R700 AP that on the web interface it is showing that the 2.4 Radio is off. I don't see any way through the web interface to turn the radio back on. Guessing that this is a CLI command that I'm not familiar with. Would someone be so kind as to help me out with the command. Have been searching on line for two day for a solution.

Thanks

[sanjay_kumar · Accepted solution]

Hi @nostrander 

From the CLI you can use the command "set state wlan0 up" (Assuming you already have an SSID on the 5 GHz broadcasting).

If this is Unleashed version, you can broadcast the SSID on 2.4 and 5 GHz from the GUI under Wlan >> Advanced options >> Enable Wlan on >> All Radios

If this is not Unleashed version, let me know the AP software version I can tell you the steps from the GUI.

[nostrander]

Thanks this is what I needed