CommScope RUCKUS Community Forums

mark_welzel · 06-25-2018

We have 3 T610 AP's. They arrived with 200.5.10.0.235. We upgraded to 200.6.10.1.308, configured Unleashed with 2 SSID's, RADIUS and the whole 9 yards. Enabled Mesh and Unleashed did not come back up. Each of the 3 AP's on their HTTP interface were s...

mark_welzel · 06-26-2018

Finally got it to work. During setup I had the AP's on an isolated switch with no access to internet or anything but the AP's and my laptop, but apparently Mesh needs to "call home". I haven't checked how, but once I put the switch on an interface wi...

mark_welzel · 06-26-2018

Yes, they are all on a new switch, VLAN1, same subnet, on the PoE port.When the AP was first configured it was connected via Ethernet. The only option to turn on Mesh that I can see is from Admin & Services/System/Mesh, other than the initial Unleash...

CommScope RUCKUS Community Forums

User Statistics

User Activity

Once Mesh is enabled Unleashed does not come back up.

Re: Once Mesh is enabled Unleashed does not come back up.

Re: Once Mesh is enabled Unleashed does not come back up.