CommScope RUCKUS Community Forums

lushano_johnson · 01-29-2016

Hi i am deploying (3) R300 access points without the zone director. We would like to run the wireless on a different Ip range as the wired lan and not have the wireless clients able to connect to any resources on the wired lan. is that possible with ...

lushano_johnson · 02-04-2016

Sorry not exactly no. I have the R300 Access point(one port) connected to--> netgear switch which is connected to another netgear switch that servers, pcs, sonicwall etc are on and the sonicwall connects to the internet service

lushano_johnson · 02-01-2016

Hello Sean thank you for the reply. I tired the setup with my netgear switch based on your instructions and once I do I cannot connect to the Internet. I already had the separate subnet setup in the access point so my wireless clients are receiving ...

lushano_johnson · 01-30-2016

thank you for the response. i setup the access points using the option for the separate subnet and dhcp so the wireless clients are receiving ip addresses that are different from the lan range but in testing i am still able to reach the lan from a wi...

CommScope RUCKUS Community Forums

User Statistics

User Activity

r300 vlan without ZD

Re: r300 vlan without ZD

Re: r300 vlan without ZD

Re: r300 vlan without ZD