Figured that, but only have support on my ZD's. Will try to see if it will connect to a ZD, but if not I guess it's off to the dump. Did take it apart hoping it had a faulty USB like all of my ZD1100 had, but no such luck.
It's Ruckus and I am the original owner.. This AP worked for years and then just died. The only hint I got that something was wrong was it rebooted itself for no reason and then appx 30 min later went t belly up.
The AP will bridge IP addresses through the "LAN" port, but that's about it. No wireless functionality or anything else. Will get the flashing green light if not connected to network and will go solid if connected.
It's my AP and the basic network functions are working. If I connect the AP to a network it will get an IP address and I can ping that address. However I can not SSH or WebGUI to the AP using that IP address. Same issue with 192.168.0.1.
I looked up the Putty and Chrome errors and there is no service to connect too. Which means the R710 has basic network features working but none of the "higher level" functions running. So the firmware must be corrupted. Is there any "special" firmwa...
