Is it possible to provision additional unleashed T300 APs in an unleashed network if they do not have an ethernet connection to the network with the master AP? If so, what is required?
Does the connection between a T300 root AP and a P300 point-to-point backhaul require the use of a switch in an unleashed network? This seems to be the case from the specs I have seen on each unit. The attached image is what I had in mind but I am...
Does the connection between a T300 root AP and a P300 point-to-point backhaul require the use of a switch in an unleashed network? This seems to be the case from the specs I have seen on each unit. Our existing ZF7762 APs (yes I know they're old) l...
Hi Ramesh
I can confirm the configuration in the sketch works fine. Only problem you might encounter is if the T300 can link back to the Master AP via a different route in the meshed network. In this case just manually configure your T300 to prevent ...
Thanks for the reply Michael. 7762 is not compatible with T300 unleashed and is being replaced. Unlike 7762, the T300 does not have an Ethernet/POE out port so I can't link it to the 7731 or P300 unit. The attached image is what I had in mind but I a...
