CommScope RUCKUS Community Forums

david_wagner_4y · 07-12-2019

We are looking to install a Unleashed T710 in a area of our system where cell service is poor for our service techs to connect back to the office. We have 1 remaining HFC power supply with a 90 V power injector to a piece of .500 coax. Is there a way...

david_wagner_4y · 03-15-2019

So I have 2 Unleashed T710's that I am trying to get working with another Unleashed T710 that is setup as a master. Firmware is up to date on all 3 units. I have factory reset the units, but once it gets the info from the master, it reboots and keeps...

david_wagner_4y · 03-18-2019

I setup the alarm function on the master. This is what I am getting when one of the T710 connects to the master T710. An alarm 'AP Has Joined' was triggered. Details: AP[f0:3e:90:1a:dc:a0] joins with uptime [120] s and last disconnected reason ...

david_wagner_4y · 03-18-2019

I am starting to wonder if the firmware update did not go thru all the way on these 2 units?

david_wagner_4y · 03-18-2019

Yes, it does have the current release of the Unleashed code. We bought the T710 as Unleashed units to start with. I would have expected possible issues with the T610 since we had to Unleash them. I can login to the units after a factory reset as a st...

CommScope RUCKUS Community Forums

User Statistics

User Activity

T710 running off of cable plant power

Can't get a unleashed T710 to sync to a T710 Unleashed Master

Re: Can't get a unleashed T710 to sync to a T710 Unleashed Master

Re: Can't get a unleashed T710 to sync to a T710 Unleashed Master

Re: Can't get a unleashed T710 to sync to a T710 Unleashed Master