CommScope RUCKUS Community Forums

When I conducted tests using P300, the results showed below.RSSI is high yet Throughput is lowRSSI is low(not high) yet Throughput is highI sometimes got these results.In my understanding, RSSI relates to Throughput.Why does this happen? What is the ...

I am using P300 now. Ruckus recommends using the default setting if you don't use special reason. My question is that if the distance is within 1km for each device, which should I use a 3km setting following the recommendation or 1km?

Does Channel Bonding generally affect communication distance(radio distance)? If the distance of the Rx and Tx are far away from each other, which channel(20MHz,40Mhz,80Mhz...) should be used?Plus, if I use P300 for long-distance communication and th...

I conducted a test using two rucks P300. The AP distance is around 20 cm and they face same direction each other. The result of speedflex showed about 20Mbps. But when the distance is about 5m,10m 20m, the results showed more than 100Mbps. My questio...