Hi, I am ruining a vSZ-H cluster with vDP`s and would like to know if it is possible to bridge the 2nd Ethernet port on the AP to a WLAN which is set to transport traffic via a GRE tunnel.So all wired traffic would be passed across the tunnel.Thanks
Hi. I flashed a T300 to use the Unleashed firmware and now I would to convert this back to the original firmware but cant see an option within the unleashed GUI to do this. Is this possible?
We run clustered VSZ’s and clustered V-DP’s In different data centres and haven’t had any routing or tunnel issues.
Traffic to the VSZ’s will be low as it’s only management traffic, so shouldn’t be to much of a concern. There is also the option to b...
Hi Dave, you could go with the DHCP option on each of the gateways and have a client L3 roam between the access points but this will likely cause issues for real time traffic.
The option I would suggest is using a centralised DHCP server in the ...
We are using a virtual SZ and WISPr and this has been working fine on OSX for a number of years, so unsure why this has just started to be an issue.If I find the problem i post an update.
HI John, Yes I am having the same issue with OSX but only intermitently with ios. I assumed this was an issue with our Captive Portal provider but if you are experinecing the same issue it would appear not.what version of vsz are you running?RegardsG...
Hi, It sounds like the AP has not been factory restet correctly, try the zd username and password as this will confirm if it has been reset. If this works it has not been reset, try factory resetting the AP again and the default credentials should wo...
