How about disable Tunnel mode in WLAN since I see you are using ZD1200, not ZD3K?All of Clients traffic via all APs will go through one ZD1200. I am afraid ZD1200 may not handle the heavy tunnel traffic load sometimes.
Hi Nathan,20MHz Channels are enough to meet all band width requirement.In fact, the 40Mhz channel is bonded via 20+20MHz channels.Please check the below table and bonding regulations. For example, if you select Channel 48, Channel 44 and 48 will be b...
You may check AP's Channelization of Radio under General Tab. By default, AP Channelization setting is auto. That means AP will select the best band width(40 or 80 MHz) to work on 5GHz band automatically. For example:....
For CLI command: ruckus> enruckus# config You have all rights in this mode.ruckus(config)# system ruckus(config-sys)# ruckus(config-sys)# dot11-country-code NLBTW: If Unleashed Master AP is not rebooted by itself after several seconds. You may reboo...
