CommScope RUCKUS Community Forums

Hi Chris,Long time Ruckus user here. What Abi and Paul said is indeed correct, but that should not be a problem if you have remote access to the Router/Gateway on-site. Here is why I say this.After you firmware upgrade the WAP and it resets, it will ...

Hi Brig,It is as simple as that. There are several ways to do this. Here what I would do for the least amount of down time:1. Change IP of one of your ZDs to be in the VLAN 10 IP Scheme2. Change your untagged (native) VLAN on your switches from VLAN ...

I have seen this behavior many times. I never did find a solution other than rebooting it.

is there a way you can get it working for the 2942's? We have a bunch (over 100) of 2942's that stand alone and I would like to upgrade them all.

All you need to do is create a Whitelist and then select both the Isolate wireless client traffic from other clients on the same AP and the Isolate wireless client traffic from all hosts on the same VLAN/subnet. But Before you do that you need to cre...