I have 4 of R610's inside a ICF house scattered inside at 2 levels for coverage but still have issues getting them to function properly. Have dead zones with signal drops and equipment trying to move from one AP to other.
I also have a t710 that ...
Can you send the commands used. i have 5 scattered around the house, R510 and one R610 and also outside one. Constantly have missed areas and drop calls and signals and sticky client even after putty use and changes done as suggested by few.
I am in. However now it states
This AP is currently unable to provide wireless access.To resolve, connect to a Ruckus Controller.To function as a standalone AP, go to Ruckus Support, navigate to the specific AP and download
I have a T710 and very similar issue. It gets assigned an ip and can be seen with log in screen on browser but cannot sign in with default credentials even after hard reset. Can ping and good but cannot log in with Putty as credentials are not known....
How do I get access to T710. I have done factory hard reset from the button but super/sp-admin is no go. Its seen and has a IP, but cannot log in directly or through the putty option either
