I've created a vlan and assigned an interface to that vlan as well as ve and assigned it an ip. however when i show interface brief it shows the pvid as vlan 1. Shouldn't it automatically assign the vlan id of the untagged port assigned to it?
vlan 100 should be untagged, vlan 101 should be untagged on 1/1/2 and tagged on 1/1/3 to 1/1/12. dont have support for the switch. this is a simple 2 vlan voice and data configuration. Not sure why this config isn't working seems like it should. yes ...
the problem is i can't ping anything on either vlan. can't ping the router 1/1/1 can't ping the voice server in port 1/1/2. the arp table shows nothing. I figured the PVID not showing the vlan member meant something was wrong with config or switch.
thx for the reply. dont have access to the switch at the moment. here s a copy of the config tho. also its SW: Version 08.0.80dT213 - so no dual-mode. both tagged and untagged as needed.show runCurrent configuration:!ver 08.0.80dT213!stack unit 1 mo...
