One of our outdoor APs model T310C continusly (20 request per minute) polls our DNS server to resolve domain vriot.ruckuswireless.com, which seems to be realted with Ruckus IoT feature. How can I stop AP from doing this? Unfortunately "rkscli: iotg s...
I have been experiencing problems with AP restarts for a very long time. APs restarts quite often with various reasons:was rebooted by the system because of [system recovery by watchdog]was rebooted by the system because of [system fault]was rebooted...
I would like to know if there is a way to isolate all guest devices connected through cable to H510 ethernet ports (LAN1 - LAN4) in the same way as it can be configured for WLAN (by Wireless Client Isolation / Isolation Whitelist) ?I want to ensure t...
Hello to All,I'm going to design and deploy network infrastructure in huge building based on Brocade ICX switches and other vendor switches (let's say "MS switches"). As I'm new at Brocade, I need to ask for an advice. The topology will be the star w...
I would like to avoid a web browser invalid certificate warnings when I'm trying to authorize to wireless network through Web Auth portal. How can I correctly create and import self-signed certificate to my vSZ for Windows clients?
I'm not sure if this issue concerns PoE, because I have noticed that the problem is also present when ZF H510 is powered by local power supply and is connected to non PoE port.
Hello Sanjay,Thank you for the response. Unfortunately we don't have valid support contract for this particular controller, that's the reason I'm asking this question on forum.Dawid
Hi David,Thank you for your answer. I decided to use MSTP only on
Brocade switches (core/access) with stp-bpdu-guard enabled for ports
dedicated for MS-Switches. I have also decided to configure errdisable
for each port. I would like to avoid rec...
Hello Alex,Thank you for response. I know the standard security practice to isolate L2 using Private VLAN and also port protection as in Brocade or other 'big' vendors. But in our deploymnet we have 3rd vendor small access switches, where the APs are...
