As a best practice, I run switch code on all devices unless I need routing functions. I always load the code I am going to run in Primary and copy it to Secondary. This is because the switch boots from primary by default. When I do upgrades, I load t...
I have had several customers that had to get AT&T to change the port settings on their Canoga Perkins box to 1g-Full to get them to work with the ICX-7750 as the CG would not auto-negotiate correctly. Other than that, if the port is state down, it is...
Try changing the default gateway to something else since you are on the same switch and it is not needed. Set option 66 to your PC since it is the tftp server. What are you using for your DHCP server?
