CommScope RUCKUS Community Forums

andy_lizak · 03-28-2020

I have an R510 AP that I am trying to use in stand alone mode. I have 3 networks I want to bring down to the AP using the ZoneFlex firmwareVLAN 10 - MGMT = This is the network I want to assign the IP to the AP to manage it.VLAN 20 - Wireless = Main ...

andy_lizak · 03-28-2020

Well I tried what you suggested. And that didn't work. But what did work was thisI tried removing the native vlan 10 and leaving it tagged and it lost connectivity. I set the native to 10 and removed it on the allowed vlan and didn't work.I swear I'v...

andy_lizak · 03-28-2020

I’ll have to try it. I do not have a DHCP scope set for the management vlan. So I will leave the configuration as is: Unleashed firmware with a static IP.

andy_lizak · 03-28-2020

Can I still statically assign the IP at the AP level or should I set a reservation on the DHCP server?

CommScope RUCKUS Community Forums

User Statistics

User Activity

R510 ZoneFlex Untagged VLAN and Cisco Switch

Re: R510 ZoneFlex Untagged VLAN and Cisco Switch

Re: R510 ZoneFlex Untagged VLAN and Cisco Switch

Re: R510 ZoneFlex Untagged VLAN and Cisco Switch