CommScope RUCKUS Community Forums

david_moseley_5 · 05-21-2018

First post. I'm setting up a VLAN. I have 2 ICX-6450-48P switches and an ICX-7250-48P switch. I configured them from the web interface. Please don't flame cuz I don't use the CLI for everything. thanks. On the 6450s on ports 1/2/3 and 1/2/4 I have th...

david_moseley_5 · 05-21-2018

True, except the only clients I'm configuring are wireless access points which will have SSIDs on vlan 1 and vlan 5, so I have to treat the ports the APs are plugged into as "trunk ports" as well. I'll try removing uplink from the ports and see if th...

david_moseley_5 · 05-21-2018

Thanks, Ben. And both 6450s are configured the same way and they pass all traffic between them. Disregard that vlan 2. I was testing on it.

david_moseley_5 · 05-21-2018

7250 Show runCurrent configuration:!ver 08.0.30hT211!stack unit 1 module 1 icx7250-48p-poe-port-management-module module 2 icx7250-sfp-plus-8port-80g-module!!!!vlan 1 name DEFAULT-VLAN by port spanning-tree rstp!vlan 5 name HVAC by port tagged ethe...

david_moseley_5 · 05-21-2018

Thanks for the info, Ben. That's the thing though. You're right. It should work as is with vlan1 set to dual and vlan5 set to tagged. On the 6450s that's how I configured those initially too, but they wouldn't pass the vlan 5 traffic until I set them...

CommScope RUCKUS Community Forums

User Statistics

User Activity

No option to add uplink on dual ports on ICX 7250

Re: No option to add uplink on dual ports on ICX 7250

Re: No option to add uplink on dual ports on ICX 7250

Re: No option to add uplink on dual ports on ICX 7250

Re: No option to add uplink on dual ports on ICX 7250