CommScope RUCKUS Community Forums

vic_lazzarevich · 03-09-2017

I work for an Event Center and provide WiFi services to promoters and vendors. I create a custom SSID for each show with a name they will associate to their event and then give them the password. Currently we ask a potential vendor how many devices...

vic_lazzarevich · 02-29-2016

I have a device far from an IDF that needs an IP. Looking for a WiFi to Ethernet bridge. Can I connect a 7372 AP to a wired 7762 via mesh and then use the 7372 to give out an IP? Using a ZD1200 controller.

vic_lazzarevich · 12-03-2014

I have a retired ZD1000 running 9.3.4.0 build21. I want to connect a 7372 AP currently running 9.8. I deleted the 7372 from my production ZD1100 and did a factory reset but it kept 9.8. Is there a way to downgrade the 7372 to 9.3.4?

vic_lazzarevich · 03-09-2017

Thanks for the suggestion. While looking at PSK I found the Self Service Guest access which looked great because it had a box to limit the devices allowed. But it only limits the number of devices per pass code and gives out unlimited pass codes as...

vic_lazzarevich · 03-03-2016

Have been off site for a few days. Will look into AP ports later today. My wifi network does not run on default VLAN 1 so all my switch ports are tagged.

vic_lazzarevich · 02-29-2016

I experimented by meshing the 7372 with an R500 and plugged my laptop into the 10/100 port on the 7372 but got no IP from DHCP. Did not think to try a static IP on the laptop and checking for internet connectivity. Should DHCP work on the laptop?

vic_lazzarevich · 12-03-2014

Thanks for the reply. I may be able to get an old 7363 still in the box. Will give it a try.

CommScope RUCKUS Community Forums

User Statistics

User Activity

I work for an Event Center and provide WiFi services to promoters and vendors.

Looking for a WiFi to Ethernet bridge.

Need to downgrade 7372 software

Re: I work for an Event Center and provide WiFi services to promoters and vendors.

Re: Looking for a WiFi to Ethernet bridge.

Re: Looking for a WiFi to Ethernet bridge.

Re: Need to downgrade 7372 software