Upon boot-up (cold or reload) the switch is failing to initialize the PoE module. Is there anything I can try to resolve this?ICX6610-48P Router>PoE Info: PoE module 1 of Unit 1 on ports 1/1/1 to 1/1/48 det ected. Initializing....PoE ...
Unfortunately, I'm not able to RMA it because it was purchased used. I was hoping there was something that could be done but after all the help so far, concerning this issue, it just wan't meant to be. Thank you everyone.
#show inline power detailPower Supply Data On stack 1:++++++++++++++++++Power Supply Data:++++++++++++++++++power supply 1 is not presentPower Supply #2: Max Curr: 13.6 Amps Voltage: 55.0 Volts Capacity: 748 Wa...
Below is a full flash from A to B and still no joy on the POE module. Any other ideas?Monitor>copy tftp flash 192.168.0.220 grz10100.bin bootLoading image from Tftp server..TFTP: received error request -- code 1Monitor>copy tftp flash 192.168.0.220 ...
