Hi all,I have a client who would like to have an easy way to switch on/off one of WLAN. The client has two WLANs - one for employee and another one for guests. The ideal solution would be a switch or button. In this way a secretary can push the butto...
Hi,I have two controllers. One of them is ZD
1200 and another one is vSZ configured as an Essentials with one interface (the
location is really small and we don't need to separate traffic)
Controllers have to serve different
sub-networks. Let’s say ...
Hi,We have installed a lockal vSPoT location server and tested it in the API Explorer and it is working fine.Our problem is the interface between vSPoT and external analytic server. When we send a GET request from the external server, we get an answe...
First of all not all client devices support the WPA3.
For example the following WLAN devices and operating systems currently support WPA3:
Windows 10 from version 1903 in combination with WPA3-compatible WLAN adapter.iPhone 11 iOS and iPadOS from...
Hi,it is the RF maths Radio Type b/g/n means your client is connected in 2,4Gh Band. Remember the 802.11ac has 5GHz band only.RSSI -75dBm and SNR 24 dB means your Wi-Fi signal is very poor for the fastest MSC.- switch off 2,4G or increase the power ...
Hi,The roaming issue can be because of poor RF design.- Firstly check your power settings. Some mobile phones are really quiet. If the AP output power is much higher as a power of a Wi-Fi mobile device you can get a connection problem on an edge. Fo...
Well. You can also try to find technical reports and more technical information on the WEB page of the Federal Communications Commission (FCC):https://fccid.io/For example the FCC ID of the Huawei P8 is QISALE-L21 and here technical details about its...
