If all the VLANS need to go across then your configuration is not correct. You need to match at every point. Not having your full topology definition makes it hard to tell you what to do but here is an example and hopefully that helps.Corerouter[A]--...

Hi Fernando,We need to know more information before we can provide the appropriate answer. I assume that your ICX is directly connected to the router? If yes, then in order for the ICX and router to pass traffic, the interfaces facing each other need...

HI Law,The instructions can be found on the manual page 210. Here is the link.https://ruckus-support.s3.amazonaws.com/private/documents/223/ZoneDirector_9.5_User_Guide_-_Rev_C_-_...Regards, _Roberto H

Based on the message you provided, it seems to be a problem between zonedirector and radius server. What Radius server are you using? Can you look at the logs of the Radius server and see what is telling you. A couple of things I can think are. "Shar...

That would be difficult to know. What I can tell you is that knowing that you are running OSPF, it should replicate across as OSPF (LSDB) database is replicated. However, there are feature in OSPF that may filter, or summarized routes, or not allow c...