CommScope RUCKUS Community Forums

waqar_ahmed_752 · 10-27-2015

We have ZD1106 zone director with 3 access points ( 2 APs are zf7372 i.e. dual band and 1 AP is zf7341 i.e. single band 2.4Gz only).My questions are below:1. Users who are connected with 5GHz AP when they move near 2.4GHz AP will they connect with it...

waqar_ahmed_752 · 10-29-2015

Thx, your were right default gateway on AP was not correctly set, lets see results today when office opens

waqar_ahmed_752 · 10-28-2015

update:I asked the user to disable his Wifi, go sit near 2.4GHz AP and enable Wifi, user was able to connect with desired AP but not getting IP address from DHCP although this AP is authorized and intervlan routing and dhcp relay etc are already conf...

waqar_ahmed_752 · 10-28-2015

Thx for reply, quoting you "where user devices has not have intelligence and are NOT aggressive enough to change AP when there is a better one available."By better you mean AP with better signal strength or better Wifi Band i.e. 2.4 or 5GHz? coz i ha...

CommScope RUCKUS Community Forums

User Statistics

User Activity

Does zone director (ZD1106) support client Roaming between 2.4GHz and 5.0GHz access points

Re: Does zone director (ZD1106) support client Roaming between 2.4GHz and 5.0GHz access points

Re: Does zone director (ZD1106) support client Roaming between 2.4GHz and 5.0GHz access points

Re: Does zone director (ZD1106) support client Roaming between 2.4GHz and 5.0GHz access points