CommScope RUCKUS Community Forums

tristan_zarasp1 · 04-18-2015

Hi,I have a campus wifi setup consisting of the following:(1) ZD3000 with 250AP licence running firmware 9.9.0.0.216(200) ZoneFlex 7363(15) ZoneFlex 7762Cisco Catalyst 4507 R+E Sup 7-E Core SwitchCisco Catalyst 2960 and 3560 10/100 PoE Access Switche...

tristan_zarasp1 · 03-02-2015

HiWe currently have a Wireless Network setup consisting of Ruckus ZoneDirector 3000 (using latest 9.9 firmware) and ZoneFlex Model 7982, 7762 and 7363.The Core Switch is a Cisco 4507 R+E with a collapsed core design. Access Switches are 2960S connect...

tristan_zarasp1 · 04-19-2015

hi Rahul, we tried option 3 and we do notice that the users are now being distributed in the all the 10 configured vlans. thanks for the suggestion. however, does this have any impact in roaming of devices in the network as opposed to using option ...

tristan_zarasp1 · 03-02-2015

Hi Rahul, Yes we do have Mesh enabled right now. We will do as what you have suggested and let you know if it solves the issue. Thanks and Best Regards, TZ

tristan_zarasp1 · 03-02-2015

Hi Munish, Thanks for your reply. For now we are not ruling out the MAC FLAPS as the possible cause of the AP reboot and sluggish network access as so far its only the logs we see on the switches. Can you suggest other things we need to look at to...

CommScope RUCKUS Community Forums

User Statistics

User Activity

VLAN Pooling Issue on ZD3000 firmware 9.9.0.0.216

Excessive MAC Flapping causing slowness on Wifi Network using ZoneDirector 3000 and Cisco 2960S

Re: VLAN Pooling Issue on ZD3000 firmware 9.9.0.0.216

Re: Excessive MAC Flapping causing slowness on Wifi Network using ZoneDirector 3000 and Cisco 2960S

Re: Excessive MAC Flapping causing slowness on Wifi Network using ZoneDirector 3000 and Cisco 2960S