CommScope RUCKUS Community Forums

ricardo_rivera_ · 05-08-2018

Good morning,At home I'm using an R700 (Master) and R500 (Mesh) on unleashed mode. I would like to know if I can use one of the ethernet port on the R500 to connect a PC(with no wifi) to get internet. Right now I connect the PC on one of the port and...

ricardo_rivera_ · 05-10-2018

Thanks you all! yesterday i got home and try it again and it started to work. I don't know why it didn't work or why it started to work. i haven't make any change but it si working!so thanks again!

ricardo_rivera_ · 05-09-2018

HI Michael,Al my devices do get ip connecting to unleashed wlan. the only devices that doesn't get any ip is PC-no-WIFI when I connect it to the r500 eth1 or eth2. I just get a ghost ip. I even try setting the ip manually on the pc-no-wifi but it did...

ricardo_rivera_ · 05-09-2018

hmm I will have try it.. I'm not sure I haven't try....

ricardo_rivera_ · 05-09-2018

Maybe I need to bridge the ethernet port to the wlan.. but I can't see the ap setting since it is running the unleashed and I can not get to the ap setting at all.. all I get the the unleashed dashboard page...

ricardo_rivera_ · 05-09-2018

I just added a diagram of what I would like to do... please let me know if that is possible or not. Thanks!

CommScope RUCKUS Community Forums

User Statistics

User Activity

R700 & R500 Unleashed - Can I use the Ethernet port to bridge to WAN?

Re: R700 & R500 Unleashed - Can I use the Ethernet port to bridge to WAN?

Re: R700 & R500 Unleashed - Can I use the Ethernet port to bridge to WAN?

Re: R700 & R500 Unleashed - Can I use the Ethernet port to bridge to WAN?

Re: R700 & R500 Unleashed - Can I use the Ethernet port to bridge to WAN?

Re: R700 & R500 Unleashed - Can I use the Ethernet port to bridge to WAN?