RUCKUS Forums - About abedard_wolf

abedard_wolf · 11-08-2025

Installing a pair of new Mellanox SN3420M switchesCross connecting them to an existing stack of ICX 7450 using an LACP etherchannel of 2x 10gb fiber linksEtherchannel comes up, but won't pass any traffic.Ruckus T1 + nvidia support confirm the configu...

abedard_wolf · 11-20-2025

Yes, correctWe fixed the issue last night. The issue was that Spanning-tree was enabled on the Brocade but was off on the Mellanox. Once it was enabled on the Mellanox traffic started to flow.This despite the ports showing as 'forwarding' in Spanning...

abedard_wolf · 11-17-2025

VLAN tagging on both sides is identicalAttempted a single cable with a single untagged VLAN on both sides and it still won't pass traffic.Port counters for sent and received packets increments on both sides, but all frames seem to be dropped.Spanning...

User Statistics

User Activity

ICX 7450 won't pass traffic to a Mellanox SN3420M

Re: ICX 7450 won't pass traffic to a Mellanox SN3420M

Re: ICX 7450 won't pass traffic to a Mellanox SN3420M