CommScope RUCKUS Community Forums

matthew_palmer_ · 08-04-2015

I have a ZD3000 model zone director running with an active dhcp server for discovery on the device. However, even when I manually set the proper zone director IP address in the AP's CLI it does not sync up. Running the command: "get director" always ...

matthew_palmer_ · 08-04-2015

Yes everything on the hardware standpoint is on the same vlan, 100. The main dhcp server is 10.0.100.1 the Zd is 10.0.100.60 and the zone director has a dhcp server 10.0.100.200-210 and on the main server for the 100 vlan it only has 10.0.100.253-254...

CommScope RUCKUS Community Forums

User Statistics

User Activity

Even after manually entering a director IP in the CLI of the ruckus AP, it still does not connect to the zone director.

Re: Even after manually entering a director IP in the CLI of the ruckus AP, it still does not connect to the zone director.