CommScope RUCKUS Community Forums

edwin_gerritsen · 06-27-2017

Hi,After upgrading to 3.5.0 we experienced mtu size issues for some applications over the wifi network. We use R500 AP's that are connected with a GRE tunnel to the SZ100 controller.If we change the mtu of the windows client to 1300 it works fine. If...

edwin_gerritsen · 05-29-2017

Hi,Maybe update the SZ100 to :SmartZone 3.4.2.0.152 (MR2) Software Release .https://support.ruckuswireless.com/software/1152-smartzone-3-4-2-0-152-mr2-software-releaseThis release is stable and have a lot of improvements.

edwin_gerritsen · 05-29-2017

Hi Ahmed,Please tell us wich platform you use.For the Smartzone 100, you can create multiple WLAN groups . The wlan groups can have one or more ssid's.This Wlan group can be attached to one or more AP's.Kind regards,Edwin

edwin_gerritsen · 05-22-2017

Hi Robert,We also have problems after upgrading to 3.5. One controller is working fine, other one is disconnected from the cluster and keeps rebooting on the fiber port. Our network vendor is Huawei. We also have a case with Ruckus and Arul is also w...

edwin_gerritsen · 05-09-2017

Yes , we also have issues with SmartZone100 and firmware 3.5.0.0.808.1. We lost one Smarzone in a cluster configuration, received an RMA but has the same problem.2. Clients gets an APIPA address, solution reboot the AP3. We use WePresent screens (wir...

CommScope RUCKUS Community Forums

User Statistics

User Activity

MTU size issues after upgrading SZ100 to version 3.5

Re: R700 on SZ100 Showing "update failed" in controller

Re: How to stop sll AP's broadcasting the same SSID

Re: SZ 3.5 Rebooting when connected to a trunk port

Re: SmartZone100 firmware 3.5.0.0.808 /Ruckus ZoneFlex 700 firmware 3.5.0.0.1333