CommScope RUCKUS Community Forums

laroue_jean_ber · 01-27-2014

Hi everyone. I have simultaneously changed IP and VLAN on my AP. The problems are : the AP is at 30 meters from the floor (I can't do the hard reset) and the AP do not respond at the new address / VLAN or the old one. I have tried to connect it wit...

laroue_jean_ber · 02-13-2014

Thanks for the answer. I've already open a case. The symptoms are really easy to reproduce: Change the IP and the management VLAN at the same time. It will respond at the new address in th new VLAN but not correctly, so you won't be able to man...

laroue_jean_ber · 02-12-2014

The AP (test) is directly connected to my pc. No dhcp configured. The AP just respond to the address that I put before I lost the control on it. It is responded to raw packet and ARP request. I will send nmap and wireshark reports.

laroue_jean_ber · 02-12-2014

Hi again, WIth some MAC scan tools I saw that the AP respond but all ports are closed or unreachable. Have you got some utilities which can force factory reset with MAC address information alone?

laroue_jean_ber · 01-29-2014

I have another AP on which I created the same default and I try to recover it (this AP is accessible). Yesterday I saw that the AP responded to the new address but not correctly (I saw the reply on a Mikrotik router and on WireShark, but no reply on...

laroue_jean_ber · 01-28-2014

Thanks for the reply. I've tried the solution without success. I've also tried to scan IP: no responses in any vlan. The WLAN works, I can connect me on the AP, but the AP doesn't respond in wireless either (no IP address). Have you ever had this ...

CommScope RUCKUS Community Forums

User Statistics

User Activity

How to recover a ZoneFlex 7762 AP?

Re: How to recover a ZoneFlex 7762 AP?

Re: How to recover a ZoneFlex 7762 AP?

Re: How to recover a ZoneFlex 7762 AP?

Re: How to recover a ZoneFlex 7762 AP?

Re: How to recover a ZoneFlex 7762 AP?