CommScope RUCKUS Community Forums

Austin · 09-25-2023

After a brown out I am having the error message below. I get it almost every time the power goes out, and it takes dozens of attempts to restart it for it to not have this issue. Is there any way I can get this fixed or replaced?SpoilerRuckus Wireles...

Austin · 06-22-2023

Hello, there were two rapid power outs yesterday and it knocked out my ICX7150. Upon reboot, it is no longer sending power over Ethernet. I tried rebooting multiple times. None of the Ethernet plugs are lighting up. When plugging in and booting Putty...

Austin · 09-25-2023

As an update, I finally got it to boot once correctly, but now it has been stuck on this step for the past 5 minutes. SpoilerRuckus Wireless Bootloader: 10.1.15T225 (Jan 30 2019 - 23:08:47 -0800)Booted from partition 1DRAM: Validate Shmoo parameters...

Austin · 06-22-2023

As it sat there longer, it now tried to boot from partition 2 and gave me this:along with a lot more lines of data after this. Again, it does not allow me to type and keeps cycling and trying.

Austin · 06-22-2023

I was not able to find the IP address for it using that method. I instead connected directly into the unit with a USB-C cable. When I booted Putty, it did not give me the option to type. I powercycled the unit, and got this now:It is not continuing p...

Austin · 06-22-2023

There are three access points - none of them are lighting up. Syst and Power are lighting up. I cannot take a picture of it at the moment but did spend an hour staring at it last night and remember.

CommScope RUCKUS Community Forums

User Statistics

User Activity

ICX-7150 Switch having error messages after brown out.

ICX7150 not working after power out - partition flash failing

Re: ICX-7150 Switch having error messages after brown out.

Re: ICX7150 not working after power out - partition flash failing

Re: ICX7150 not working after power out - partition flash failing

Re: ICX7150 not working after power out - partition flash failing