CommScope RUCKUS Community Forums

SMS2024 · 02-01-2023

I have three WAPs in my house and all are without power. We have the main controller which has power but nothing else. Things I have tried:Resetting the WAPs Resetting the main controllerRunning a different ethernet cable to the WAP to see if the c...

SMS2024 · 02-06-2023

At what point in the process do I type those commands? When I open Putty and type enable, it gives me an error message that says "unknown command" and ignores the command itself. Is there a different set of instructions for where to enter these com...

SMS2024 · 02-06-2023

Ok so I went through the process described above. I did the reset where I disconnected and then held the button in, then reconnected to the power and got to the point where the lights were flashing, but only amber colored. Next I followed the steps...

SMS2024 · 02-01-2023

1. There was a power outage prior to these not working2. There are lights on (upload would work, link to image here: https://imgur.com/a/ypLa1eh) If that link does not work let me know a better way to share it. There is an amber light on the "SYS...

CommScope RUCKUS Community Forums

User Statistics

User Activity

WAPs have no power

Re: WAPs have no power

Re: WAPs have no power

Re: WAPs have no power