CommScope RUCKUS Community Forums

We can execute the commands on the AP from the ZD itself when the specific AP is managed by the ZD.Please find the details below.SSH in to the ZD CLI using PUTTY application.ruckus>ruckus> enruckus# debugruckus(debug)# remote_ap_cli {-A / -a <mac add...

Issue : APs on 6.1.1 and 5.2.2 are not able to connect to vSPOT LBS server. Post troubleshooting it was understood that APs on 6.1.1 use TLS 1.2 by default and vSPOT by default will be on TLS 1.0. So we need to change the TLS config on vSPOT to authe...

To have the SSID broadcasted only on specific radios we need to have a separate WLAN group that can be mapped to an AP group radio.Step 1:  Go to Network -> Wireless LANs and create a Wlan group. Step 2: While creating the SSID, map the SSID to the n...

The process of configuring the AP with static IP needs to be done before its added to the cloud.AP can be configured with static IP using CLI or Web console.Only after the AP is configured with static IP, its SN should be added to the cloud.Below are...