CommScope RUCKUS Community Forums

michael_fouracr · 10-07-2016

I have logged a case for this, but I am interested if anyone else is seeing the same behaviour. I have installed a new Unleashed network consisting of R310s and T300s running v200.2.9.13.186. I noticed that the power status LED of the master AP is ...

michael_fouracr · 01-27-2017

I encountered the same issue a few months back after upgrading to v200.2.9.13.186. I logged a support case for it and was advised that it might be fixed in a future release, but in the meantime it could be worked around by using a static IP. Here's...

michael_fouracr · 10-26-2016

I had a similar problem when adding a T300 to an existing Unleashed network running 200.2. In my case resetting the AP using the reset button worked, but you would figure that would do the same as a reset via SSH.In your case, it might be worth ruli...

michael_fouracr · 10-18-2016

Hi Jeff & Martin,Surely 'Founding' is the correct word in this instance? 'Founding' means 'To establish or set-up', so this looks fine to me.'Finding' would not make sense, because at this point in the process there is no Unleashed network to find.BW...

michael_fouracr · 10-10-2016

Hi Simone,Thanks for the reply - I'm glad it's not just me. I'll check if I get the same behaviour as you did when setting a static IP on the master.Michael

michael_fouracr · 10-05-2016

I've just tested this and the bug is fixed in 200.2.9.13.186.

CommScope RUCKUS Community Forums

User Statistics

User Activity

Power status LED continually flashes on master AP after upgrade to Unleashed 200.2.9.13.186

Re: Why is the PWR Light Flashing Green on my R710?

Re: Impossible to join the unleashed network (T300)

Re: "Founding the Unleashed Network, it may take a few minutes." - Is this a typo?

Re: Power status LED continually flashes on master AP after upgrade to Unleashed 200.2.9.13.186

Re: Unleashed Channel Settings