When you reset your phone it would have reset the MAC address used by your phone when connecting to the Wi-Fi. Depending on how the network is configured to onboard your device, that could cause a problem. There are options where that shouldn't be a ...
Working from the left of the switch, from the front, is first an old school console port using RS232. Easiest way to use that port to connect to the switch and define the switch IP address and a management IP address. The next port over, the one abov...
Congratulations on working through TFTP on the Mac! That took me forever to figure out!If the switch joined Unleashed, then it makes me wonder if Unleashed also did a code upgrade after the power outage, which I will get to in a second.I have never b...
So the AT&T box is acting as an "all-in-one" set up and I would bet somewhere the two networks (AT&T and Ruckus) aren't playing nice. Could be channel settings, SSIDs, any number of things. You got yourself a good problem here! The first thing I woul...
Mac is harder to do the transfer on because "TFTP is built in natively" but it always confused me. TFTP is just the transfer protocol used to get the code from a computer to the switch (or AP). Windows you can get a free TFTP server using TFTPd64 (aw...
