CommScope RUCKUS Community Forums

faisal_cholayil · 02-06-2014

Hello, I have new ZF 7055 and i configured as a standalone AP and working but if i reboot the AP i lost the connectivity and show assigning ip address and i unable to access the management ip too,The radio LED is blinking. To access the AP i have ...

faisal_cholayil · 02-10-2014

Hi Keith, My colleague found a solution. he change the country to UAE and set channel 6 and it works. Thanks

faisal_cholayil · 02-08-2014

Hello Keith, I thought i was able figured out the issue but not yet. Below is the changes i did step 1: Step2: It works but if i reboot the device, i will lose both access (management and wirelss)

faisal_cholayil · 02-08-2014

Hi Keith, Thank you for the response and i realized the issue, i think it because i assigned Vlan1 for Wireless access because i saw that Vlan1 is already assigned for management, when i use Vlan2 with different network on local subnet the issue not...

CommScope RUCKUS Community Forums

User Statistics

User Activity

ZF 7055 unable to connect after reboot

Re: ZF 7055 unable to connect after reboot

Re: ZF 7055 unable to connect after reboot

Re: ZF 7055 unable to connect after reboot