CommScope RUCKUS Community Forums

geb_blum · 01-14-2014

Bought a Ruckus 7363 for use as a standalone WAP. I can connect to the 7363 via wireless, but the unit does not connect to my LAN. It is plugged into a WatchGuard hardware firewall with IP address 192.168.16.1. The firewall is also my DHCP server. Th...

geb_blum · 01-14-2014

I found the problem. The Ethernet ports on the WatchGuard firewall are enabled/disabled on the unit's configuration page. When the firewall was installed, the unused ports were disabled. I switched the 7363 to another port and it worked fine. Sorry t...

geb_blum · 01-14-2014

I did follow the guide. As I described before, my hardware firewall is the LAN's DHCP server. I have an SBS 2011 server running on the network that is the DNS server (not the DHCP server). The hardware firewall is 192.168.16.1 and the DNS server is 1...

geb_blum · 01-14-2014

Not using VLANs.

geb_blum · 01-14-2014

Thanks, but I'm not familiar with secure shell. The only access I can get to the configuration page is via the setup instructions for the 7363 on a laptop. Once it is connected to my LAN, I can't ping it at 192.168.0.1 nor does the device appear in m...

geb_blum · 01-14-2014

I configured it as per Ruckus instructions with a 192.168.0.1 connection on a laptop and followed the instructions. Everything on the configuration seemed to work fine. I suspect I need to enter some default gateway information (192.168.16.1 on my sy...

CommScope RUCKUS Community Forums

User Statistics

User Activity

Ruckus 7363 cannot get DHCP lease

Re: Ruckus 7363 cannot get DHCP lease

Re: Ruckus 7363 cannot get DHCP lease

Re: Ruckus 7363 cannot get DHCP lease

Re: Ruckus 7363 cannot get DHCP lease

Re: Ruckus 7363 cannot get DHCP lease