Hi
We have a Ruckus zonedirector 1100 and a Palo Alto firewall.
We have 3 wi-fi networks set up. In simple terms, one internal, two on a different network.
The zone director has a 10.35.x.x address, the other networks have a 172.16.x.x address....
I'm on 6.0.7 at the moment.
I've got the log settings the same, but it is sending a whole lot of logs to the PA.
It does appear to be working, but it doesn't appear to be mapping everyone, and some mappings are dropping off half way through the day...
it was more or less the same as above, but i couldn't get it to work as a Regex Identifier. It was getting the logs, but wasn't identifying the success ones, so i changed it to field identifier, and it now all appears to be working fine.
The next s...
Don't worry, managed to sort it out. Done it in a slightly different way to what you have outlined above, but it is finally starting to sort itself out and filter correctly on the guest network.
Thanks all for help and suggestions.
Hi Odilo
I'm trying this, from your other link, but i'm slightly confused with one of the steps.
your adding a Server Monitoring for the Zone Director, type syslog server. What IP address do i put in there? The IP for the zone director, or the IP...
Hi
Thanks for this, i've been looking at this, and going to upgrade the firmware on the box to 9.8.2.0.15 either tonight or over the weekend, and i'll attempt to do this to see how it works.
I'll be trying the Syslog fowarding from the ZD to the PA...
