Hi,Its password is SN,But after connecting, the terminal cannot obtain the address. You need to manually configure the wireless network to the address of the 192.168.0.X network segment.You can only keep one AP and PC on the switch, and use the defau...
Hi,You can log in to the switch via SSH or use a console cable to connect to the switch. Use the commands show poe x/x/x (switch port) and show run to check whether the POE configuration is normal. If both are normal, the switch may be faulty.You can...
Hi,In fat AP mode without any configuration, the AP will transmit the SSID of Config xxxx. Its password is SN. The default IP address of the AP is 192.168.0.1 (if there is a DHCP server in the network, it will automatically obtain the address). You c...
