cancel
Showing results for 
Search instead for 
Did you mean: 

zd 1200 upgraded to version 10.0.1 .0.35 missing access point in to maps

antonio_sanchez
New Contributor II
I have recently upgraded my ZD 1200 from version 9.13 to version 10.0.1.0.35, when I opened the maps the Access points have visually disappeared, and I can't locate them inside the map to relocate them. Something similar has happened to him and he can help me.

thank you.
3 REPLIES 3

marco_eichstet1
Contributor III
Hi,

i think the maps works a little bit different than before.
I configured the GPS Coordinates (Latitude and Longitude) under "Configure ::: Access Points" for each AP. Then the APs appeared.

I got Latitude and Longitude from Google Maps.
But i did not found a way how i can use the old Map-View of Version 9.13.
Maybe this is not possible anymore in FW 10.0.1.

KR
Marco

antonio_sanchez
New Contributor II
gracias por la respuesta.

He configurado las coordenadas de google, pero no he conseguido que se vean.

Lo he conseguido volviendo a la versión 9.13, liberando los Access point en el mapa, después he vuelto a actualizar a la versión 10.0 y ya se veian .

saludos.
Antonio

antonio_sanchez
New Contributor II
thank you for the answer.

I've set up the google coordinates, but I can't get them to show.

I have achieved this by returning to version 9.13, releasing the Access points on the map, then I have updated back to version 10.0 and they were already seen.

greetings.
Antonio