vSCG Setup Wizard bootstrapping error.

[william_fowler_]

When I finish the vSCG Setup Wizard I get a bootstrapping error. I tried factory defaulting and starting over but get the same thing. I'm using the steps in the Getting Started Guide. Anything I should check or do differently?

[sid_sok]

https://support.ruckuswireless.com/

[hugo_a_sanchez]

Thanks Sid

[jonathan_fourie]

Did you get it working?

[hugo_a_sanchez]

hi Jonathan, still nothing! I will create a support ticket to see what happens, I mean, I met the requirements 2 cores, 5 GB memory and 100 GB and I don't reload the machine but still for some reason gets stuck in the bootstrapping phase.

[jonathan_fourie]

What I did eventually...

Delete the faulty VM
Re-import the OVA
Gave it 8GB RAM, even though my VMWARE machine only has 8GB (I only gave it 4GB first)
Assign the HDD to 200MB with Thin provisioning (I had thick provisioning first)
Deleted the two extra network interfaces.
I also the left it on 4 cores.
Started up again, and in the CLI, I only configured the network and restarted the network, but I did not reload the system.
Then I went onto a web browser with the IP that was configured, and it automatically went directly to the cluster configuration, and I continued from there..I did not go back on the web setup at all

After that the end process.. bootstrap etc.. took about 5 - 10 minutes to complete