Hi I have a Zone Flex 7962 AP that I use in (standalone) running firmware 22.214.171.124 I was able to upgrade from 8.0.0 to 126.96.36.199 using the web and the default settings although can anyone please advise if there is any new firmware available for this device.
I have downloaded the below although if I point to my FTP or TFTP server I get a
The file cert8.db in your profile folder may have become corrupted. Delete this file while Firefox is closed.
Open your profile folder:
Click the menu button New Fx Menu , click help Help-29 and select Troubleshooting Information. The Troubleshooting Information tab will open.
Under the Application Basics section, click on Show Folder. A window with your profile files will open.
Click the menu button New Fx Menu and then click Exit Close 29
Click on the file named cert8.db.
I'm afraid the standalone AP auto-upgrade thru the Web server has not been
maintained for a couple years now. With modern AP firmware including a Local
upgrade method that allows you to browse to an image on your PC, after you
downloaded it from the Support portal, the online server usage has been limited.
As Munish mentioned, only ZDs need to be upgraded following a specific path
as memory tables changed between versions. APs can upgrade/downgrade to
and from any standalone AP image independantly.
From the Support page Downloads page, pull the 188.8.131.52.9 firmware for zf7962
model AP, and see if you can use the Local upgrade method to install it? Good
luck and best regards.