Zone Director 1200 Not Connected Web İnterface

[ferdi_kilic]

Hi,

I can not access the device 's web interface .

I need to reboot my reach .
After a while, it lost access happening again .
The upper status LED flashes red .
Then simultaneous wireless connections are breaking and coming back.
Best regards

[monnat_systems]

pls note: I am making assumptions here...

you are not able to access the web UI and somehow http deamon or process is exiting...
not sure why..

[monnat_systems]

ferdi,

do you have windows 10 devices in your network?
can you share your network topology?

further looking into syslog - Sep 20 04:24:45 IC_ENERJI mDNSResponder: mDNSPlatformSendUDP got error 99 (Cannot assign requested address) sending packet to FF02:0000:0000:0000:0000:0000:0000:00FB on interface FE80:0000:0000:0000:F2B0:52FF:FE04:42C0/uif0/202
Sep 20 04:24:46 IC_ENERJI mDNSResponder: mDNSPlatformSendUDP got error 22 (Invalid argument) sending packet to FF02:0000:0000:0000:0000:0000:0000:00FB on interface FE80:0000:0000:0000:F2B0:52FF:FE04:42C0/uif0/202
 pls chk this and apply the solution here...

https://forums.ruckuswireless.com/ruckuswireless/topics/windows-10-mdns-and-broken-wireless-network?...

[ferdi_kilic]

Hello Monate;I did a software update. A problem resolved now. I'll follow logs. I will inform you in a negative situation. Thank you very much for your help and your support. Best regards
ZD software [9.9.0.0.205] from the version [9.9.1.0.31] was later upgraded versions contain the
ZD image has been upgraded from [9.9.1.0.31] to [9.12.0.0.336]