ZD3000 doesn't generate IP for web GUI

[tim_pritchard]

Several ZD3000 added to inventory recently boot properly and get to the green light stage, but don't generate IPs to allow me to access web GUI for setup.

I've performed a factory reset - no change.

Any ideas how to fix this?

[michael_brado]

If you are pressing the indented F/D button for 8+ seconds before release, the ZD's default IP address is 192.168.0.2 with uid/pw of admin/admin.

You need to pre-set your PC to an IP address in the 192.168.0.x range and connect Ethernet to either front port.

By default, the internal DHCP server will not be enabled.  

[interface]

Same to me i press F/D and also the Reset button, IP not found, use also IP Scanner

[syamantakomer]

Hi @interface,

You have responded to a very old thread.

Please start a new post for faster and better answers.