ZD1200 firmware downgrade 10.1 to 10.0

[daniel_medina_4]

I have a ZD1200 with firmware 10.1 without problems, but a tried to downgrade the firmware from 10.1 to 10.0, after downgrade the firmware I just lost the controller, I cant ping it or access by any via. Any advise?

[michael_brado]

Hi Jeronimo,

    If you *do* save a backup before performing an upgrade, as we recommend/suggest,
the ZD will acknowledge that you have a config from the previous version (ie 10.0) if you
do a "downgrade" (upgrade to earlier version code) and ask if you want to use it. 

    You only lose the configuration if you downgrade but didn't have a saved configuration. 
Hopefully, it was saved before upgrading as advised/recommended, as it would need to
be restored if config is lost by downgrading.

[7array_solution]

ruckus r-650 and ZD-1200 supported Firmware

[Vineet_nejwala]

@7array_solutions

ZD12k with code 10.4 and above supports r650 AP's.

Best Regards

Vineet