Showing results for 
Search instead for 
Did you mean: 

ZD layer 3 deployment.

New Contributor II

Dear members,

Please guide me about Ruckus ZD L3 deployment system. How could I can connect AP's via L3. 


Contributor II

If you have just a few APs in a different subnet from your ZD, just SSH into the APs and tell them the IP address of the ZD:-

set director ip [ZoneDirector’s IP address]

If you have a lot of L3 connected APs, you can add the info to your DHCP server. There's a good worked example here:-

If you have a firewall between the ZD and the APs, then the ports which need to be opened are listed here:-